A brand new product, this connector is a copy of the original Mk1 Mr2 N1 engine harness to chassis connector plug. This plug sits in a location where moisture causes the pins to badly corrode and is the cause of many electrical issues on these cars. In fact if you inspect your original connector i suspect you will already see signs of green oxidization or in worse causes actual pins broken off.
This new pigtail repair connector allows you to splice this new connector into your harness to replace the original plug, the connector itself is not available from Toyota as a separate plug, so i thought it would be a good idea to reproduce this connector to help save our cars.
Not only is this pigtail good for repairing corroded plugs, but also very useful for engine conversion harness building, as you can use this pigtail to directly wire your new engines harness into the AW11 chassis without having to cut up your original 4a-ge engine harness, in fact i now use these as standard on all of my Aw11 wiring harnesses rather than rely on poor quality original plugs or having to sacrifice a 4a-ge harness.
All wires on this pigtail are 16awg.